Spray System

The Australian bush is brutal, fire can come from any direction and you need to be ready for it. EmberAttack is one part of a larger solution to protect your home in a program of maintenance and prevention creating a waterfall from your gutters.

Installing the Spray System

Roof sprinkler system for protection from bushfire

Sprinkler Installation Instructions

Recycles your water and protects your tanks

When water pressure is poor or non-existent—the times you need protection most - EmberAttack's closed-loop system keeps working. Your pre-filled collection bin becomes a lifeline, with water continuously pumped to your ridge line sprayers, flowing down across your entire roof to extinguish embers, then returning via your full gutters back to the bin. This efficient recirculation means you won't run out of water at the worst possible moment. Meanwhile, your main drinking water tanks remain protected and isolated, safe from contamination by fire retardants or chemicals. It's the system that works when traditional protection fails.
Full Instructions coming soon.

Installation

To install EmberAttack cut a 100mm section into your down pipe to install EmberAttack with the Watergate valve at a manageable height approximately 1200mm off the ground.

Please note please positioning the connectors above the Watergate Valve

Once EmberAttack is installed into the downpipes make sure all joins are water proof using suitable pipe adhesives and silicone adhesives.

To create the Waterfall effect which back fills your gutters:-

  1. Remove one of the caps and install a snap on hose connector.
  2. Plug on the hose to the just installed connector.
  3. Insert the Watergate valve, pushing right into the slide and across the pipe cutting the water or stopping it from flowing through the pipe.
  4. Turn the tap on and allow the water to flow up the gutters to fill them. Once full the gutters will overflow creating a waterfall effect wetting the area around your home protecting the gutters and the area around your home from embers. At this point you can choose to leave the tap on or switch off to conserve water.

PDF Download

More EmberAttack Video guides

Frequently Asked Questions

What is the best location for EmberAttack Waterfall?

The Waterfall system is more suitable where you have a permanent water supply like a big town or city that backs onto the bush and you can connect a garden hose and there is plenty of water.

How does EmberAttack protect my tanks?

EmberAttack protects your tanks by blocking water from reaching your drinking water tanks using the patented Watergate Valve.

What is the best location for EmberAttack Sprinkler System?

The Sprinkler system is more suitable where you do not have a permanent water supply and you are on tank water.

What is an Ember Attack?

Ember attack is the most common way houses catch fire during bushfires, occurring when wind carries burning debris (embers, twigs, leaves, bark) far ahead of the main fire, lodging in gaps, gutters, or on flammable materials around a home to ignite it, often before the fire front even arrives. These burning fragments can travel kilometres, creating new spot fires and overwhelming properties with multiple ignition points, making defense crucial.

How Ember Attack Works

  • Transport: Strong winds loft embers, sometimes kilometers away, in front of the fire.
  • Accumulation: Embers collect in vulnerable spots like roof gutters, under eaves, around windows, under doors, and in dry leaf litter.
  • Ignition: Once a cluster of embers smolders, the heat builds until flames erupt, igniting the building or surrounding fuel.
  • Entry: They can enter through small gaps, uncovered vents, or break windows, leading to internal fires.
  •  

Why It's Dangerous

  • Early & Late Threat: Embers can strike hours before the main fire and persist long after.
  • Unpredictable: They can start fires many streets away from the main blaze.
  • Silent Assault: It's a hidden danger, often more destructive than the main flames.
  •  

Protection Measures

  • Install EmberAttack: The EmberAttack sprinkler system helps protect the whole roof and be tailored to suit those difficult areas where embers can collect.
  • Clear Debris: Keep gutters, decks, and yards free of leaves and flammable materials.
  • Seal Gaps: Cover vents and seal gaps around windows, doors, and rooflines.
  • Protect Vulnerabilities: Install ember guards on vents and use metal gutter guards

Why did you say the Sprinkler System is better?

My house has come under EmberAttack and it has many roof segments. A roof sprinkler system my neighbours have doesn’t deal with all segments and issues. Embers can settle under Solar Panels in corners that normal sprinklers don't get to. With EmberAttack system you place one sprinkler run on the ridge cap running the full length of the roof and have a seperate run line covering the solar panels and hidden corners and you do this for each roof segment.

Which Transport company do you use?

EmberAttack has been designed to be delivered Australia wide buy Australia Post.

Up to 90% of homes lost in bushfires are destroyed by ember attack - not direct flames.
Ember attacks are lethal

Ready to protect your home?

It's not the fire that destroys most homes. It's the invisible ember attack that rains down kilometres ahead of the blaze. Up to 90% of homes lost in bushfires are destroyed by ember attack - not direct flames.

Contact Us Today

EmberAttack Enquiries

We'll get back to you ASAP

We're available 8:00 AM – 5:00 PM AEST



Please contact EmberAttack initially by form submission or email.
We will happily call you if preferred as we are located in the Northern Beaches Suburbs of Sydney, but if we can solve a problem by email it may be easier (but we recognise this is not always possible).
Patent No. 2010224350 | Patent Pending Application No. 2025902857
Feel free to contact us for more information
info@emberattack.com
© 2026 EmberAttack | All rights reserved
Terms & Conditions
Powered by ESB